Simple model of Micro-Electrical Discharge Machining

Sambo Sar; Gunawan Setia Prihandana; M. Mahardika; M. Hamdi; Kimiyuki Mitsui

Simple model of Micro-Electrical Discharge Machining

Sambo Sar, Gunawan Setia Prihandana, M. Mahardika, M. Hamdi, Kimiyuki Mitsui

Research output: Contribution to conference › Paper › peer-review

1 Citation (Scopus)

Abstract

Micro-EDM is widely used in micro-part manufacturing that requires accurate sizes and high quality of surface finish. In this paper, an empirical model of erosion process has been proposed. This model is able to predict crater size and volume of material removal per discharge. In order to eliminate the irregularity such as arcing in the analysis, the overall removal rate is calculated base on regular spark number. The spark numbers are counted by pulse counting method.

Original language	English
Publication status	Published - 2009
Externally published	Yes
Event	5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009 - Osaka, Japan Duration: 2 Dec 2009 → 4 Dec 2009

Conference

Conference	5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009
Country/Territory	Japan
City	Osaka
Period	2/12/09 → 4/12/09

Keywords

Crater sizes
EDM modeling
Electrical machining
Micro-EDM
Pulse counting

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Cite this

@conference{f742e4d086d7410e996e58d50ed8221a,

title = "Simple model of Micro-Electrical Discharge Machining",

abstract = "Micro-EDM is widely used in micro-part manufacturing that requires accurate sizes and high quality of surface finish. In this paper, an empirical model of erosion process has been proposed. This model is able to predict crater size and volume of material removal per discharge. In order to eliminate the irregularity such as arcing in the analysis, the overall removal rate is calculated base on regular spark number. The spark numbers are counted by pulse counting method.",

keywords = "Crater sizes, EDM modeling, Electrical machining, Micro-EDM, Pulse counting",

author = "Sambo Sar and Prihandana, {Gunawan Setia} and M. Mahardika and M. Hamdi and Kimiyuki Mitsui",

year = "2009",

language = "English",

note = "5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009 ; Conference date: 02-12-2009 Through 04-12-2009",

}

TY - CONF

T1 - Simple model of Micro-Electrical Discharge Machining

AU - Sar, Sambo

AU - Prihandana, Gunawan Setia

AU - Mahardika, M.

AU - Hamdi, M.

AU - Mitsui, Kimiyuki

PY - 2009

Y1 - 2009

N2 - Micro-EDM is widely used in micro-part manufacturing that requires accurate sizes and high quality of surface finish. In this paper, an empirical model of erosion process has been proposed. This model is able to predict crater size and volume of material removal per discharge. In order to eliminate the irregularity such as arcing in the analysis, the overall removal rate is calculated base on regular spark number. The spark numbers are counted by pulse counting method.

AB - Micro-EDM is widely used in micro-part manufacturing that requires accurate sizes and high quality of surface finish. In this paper, an empirical model of erosion process has been proposed. This model is able to predict crater size and volume of material removal per discharge. In order to eliminate the irregularity such as arcing in the analysis, the overall removal rate is calculated base on regular spark number. The spark numbers are counted by pulse counting method.

KW - Crater sizes

KW - EDM modeling

KW - Electrical machining

KW - Micro-EDM

KW - Pulse counting

UR - http://www.scopus.com/inward/record.url?scp=84883323938&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84883323938

T2 - 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009

Y2 - 2 December 2009 through 4 December 2009

ER -

Simple model of Micro-Electrical Discharge Machining

Abstract

Conference

Keywords

UN SDGs

Fingerprint

Cite this