Measurement of Cholesterol Concentration Based on Bioimpedance with AD5933-EVAL

Khusnul Ain; R. Arif Wibowo; Soegianto Soelistiono; Lailatul Muniroh

doi:10.1109/ICICI-BME.2017.8537752

Measurement of Cholesterol Concentration Based on Bioimpedance with AD5933-EVAL

Khusnul Ain, R. Arif Wibowo, Soegianto Soelistiono, Lailatul Muniroh

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Abstract

It has been measurements of cholesterol concentrations based on bio impedance with EVAL-AD 5933. The research was conducted by installing Digilent PmodIA: impedance analyzer with ATMega 328 to obtain bio impedance spectrometer device frequency range from 1 kHz to 100 kHz. The device is then used to perform impedance spectroscopy and to detect cholesterol concentrations by using a parallel wire electrodes. The results showed that the device was able to detect the cholesterol concentrations of 50, 100, 150, 200, 250 and 300 ppm by 7.563 kΩ/ ppm at a frequency of 20 kHz, 8.938 kΩ/ppm at a frequency of 30 kHz and 10.31 kΩ/ppm at a frequency of 40 kHz.

Original language	English
Title of host publication	Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	251-254
Number of pages	4
ISBN (Electronic)	9781538634554
DOIs	https://doi.org/10.1109/ICICI-BME.2017.8537752
Publication status	Published - 15 Nov 2018
Event	5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017 - Bandung, Indonesia Duration: 6 Nov 2017 → 7 Nov 2017

Publication series

Name	Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017

Conference

Conference	5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017
Country/Territory	Indonesia
City	Bandung
Period	6/11/17 → 7/11/17

Keywords

AD5933-Eval
bio impedance
cholesterol concentration

Access to Document

10.1109/ICICI-BME.2017.8537752

Cite this

Ain, K., Wibowo, R. A., Soelistiono, S., & Muniroh, L. (2018). Measurement of Cholesterol Concentration Based on Bioimpedance with AD5933-EVAL. In Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017 (pp. 251-254). Article 8537752 (Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICICI-BME.2017.8537752

Ain, Khusnul ; Wibowo, R. Arif ; Soelistiono, Soegianto et al. / Measurement of Cholesterol Concentration Based on Bioimpedance with AD5933-EVAL. Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 251-254 (Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017).

@inproceedings{91ca9fa9d2504d37bb58eea85563b076,

title = "Measurement of Cholesterol Concentration Based on Bioimpedance with AD5933-EVAL",

abstract = "It has been measurements of cholesterol concentrations based on bio impedance with EVAL-AD 5933. The research was conducted by installing Digilent PmodIA: impedance analyzer with ATMega 328 to obtain bio impedance spectrometer device frequency range from 1 kHz to 100 kHz. The device is then used to perform impedance spectroscopy and to detect cholesterol concentrations by using a parallel wire electrodes. The results showed that the device was able to detect the cholesterol concentrations of 50, 100, 150, 200, 250 and 300 ppm by 7.563 kΩ/ ppm at a frequency of 20 kHz, 8.938 kΩ/ppm at a frequency of 30 kHz and 10.31 kΩ/ppm at a frequency of 40 kHz.",

keywords = "AD5933-Eval, bio impedance, cholesterol concentration",

author = "Khusnul Ain and Wibowo, {R. Arif} and Soegianto Soelistiono and Lailatul Muniroh",

note = "Publisher Copyright: {\textcopyright} 2017 IEEE.; 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017 ; Conference date: 06-11-2017 Through 07-11-2017",

year = "2018",

month = nov,

day = "15",

doi = "10.1109/ICICI-BME.2017.8537752",

language = "English",

series = "Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "251--254",

booktitle = "Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017",

address = "United States",

}

Ain, K , Wibowo, RA , Soelistiono, S & Muniroh, L 2018, Measurement of Cholesterol Concentration Based on Bioimpedance with AD5933-EVAL. in Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017., 8537752, Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017, Institute of Electrical and Electronics Engineers Inc., pp. 251-254, 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017, Bandung, Indonesia, 6/11/17. https://doi.org/10.1109/ICICI-BME.2017.8537752

Measurement of Cholesterol Concentration Based on Bioimpedance with AD5933-EVAL. / Ain, Khusnul ; Wibowo, R. Arif ; Soelistiono, Soegianto et al.
Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017. Institute of Electrical and Electronics Engineers Inc., 2018. p. 251-254 8537752 (Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Measurement of Cholesterol Concentration Based on Bioimpedance with AD5933-EVAL

AU - Ain, Khusnul

AU - Wibowo, R. Arif

AU - Soelistiono, Soegianto

AU - Muniroh, Lailatul

PY - 2018/11/15

Y1 - 2018/11/15

N2 - It has been measurements of cholesterol concentrations based on bio impedance with EVAL-AD 5933. The research was conducted by installing Digilent PmodIA: impedance analyzer with ATMega 328 to obtain bio impedance spectrometer device frequency range from 1 kHz to 100 kHz. The device is then used to perform impedance spectroscopy and to detect cholesterol concentrations by using a parallel wire electrodes. The results showed that the device was able to detect the cholesterol concentrations of 50, 100, 150, 200, 250 and 300 ppm by 7.563 kΩ/ ppm at a frequency of 20 kHz, 8.938 kΩ/ppm at a frequency of 30 kHz and 10.31 kΩ/ppm at a frequency of 40 kHz.

AB - It has been measurements of cholesterol concentrations based on bio impedance with EVAL-AD 5933. The research was conducted by installing Digilent PmodIA: impedance analyzer with ATMega 328 to obtain bio impedance spectrometer device frequency range from 1 kHz to 100 kHz. The device is then used to perform impedance spectroscopy and to detect cholesterol concentrations by using a parallel wire electrodes. The results showed that the device was able to detect the cholesterol concentrations of 50, 100, 150, 200, 250 and 300 ppm by 7.563 kΩ/ ppm at a frequency of 20 kHz, 8.938 kΩ/ppm at a frequency of 30 kHz and 10.31 kΩ/ppm at a frequency of 40 kHz.

KW - AD5933-Eval

KW - bio impedance

KW - cholesterol concentration

UR - http://www.scopus.com/inward/record.url?scp=85059376259&partnerID=8YFLogxK

U2 - 10.1109/ICICI-BME.2017.8537752

DO - 10.1109/ICICI-BME.2017.8537752

M3 - Conference contribution

AN - SCOPUS:85059376259

T3 - Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017

SP - 251

EP - 254

BT - Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017

Y2 - 6 November 2017 through 7 November 2017

ER -

Ain K , Wibowo RA , Soelistiono S , Muniroh L. Measurement of Cholesterol Concentration Based on Bioimpedance with AD5933-EVAL. In Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017. Institute of Electrical and Electronics Engineers Inc. 2018. p. 251-254. 8537752. (Proceedings of 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering, ICICI-BME 2017). doi: 10.1109/ICICI-BME.2017.8537752

Measurement of Cholesterol Concentration Based on Bioimpedance with AD5933-EVAL

Abstract

Publication series

Conference

Keywords

Access to Document

Fingerprint

Cite this