Liquid level sensor using two fiber bundles

A. H. Zaidan; Sujito; M. Yasin; M. Pujiyati

doi:10.1016/j.sna.2018.08.032

Liquid level sensor using two fiber bundles

Samian, A. H. Zaidan, Sujito, M. Yasin, M. Pujiyati, Supadi

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

Abstract

The two-tier detection of liquid level using two fiber bundles as sensor has been successfully demonstrated. Each fiber bundle is paired with a reflector displacement device (RDD) to detect liquid level in accordance with its detection area. Based on displacement sensor, the working principle of system is by utilizing hydrostatic pressure to shift the reflector attached to the membrane. Detection of liquid level is done through changes of reflected light intensity from the reflector that goes into each sensor probe. The results show that the sensor can be applied to the front slope or back slope area. Working area and resolution of sensors working on the front slope area are 0–130 cm and 1 cm, meanwhile for the back slope area are 0–50 cm and 0.1 cm.

Original language	English
Pages (from-to)	552-558
Number of pages	7
Journal	Sensors and Actuators, A: Physical
Volume	280
DOIs	https://doi.org/10.1016/j.sna.2018.08.032
Publication status	Published - 1 Sept 2018

Keywords

Back slope
Fiber bundled probe
Front slope
Hydrostatic pressure
Liquid level sensor

Access to Document

10.1016/j.sna.2018.08.032

Cite this

@article{99df5c37eb3f4444a01dfa39f08e80a1,

title = "Liquid level sensor using two fiber bundles",

abstract = "The two-tier detection of liquid level using two fiber bundles as sensor has been successfully demonstrated. Each fiber bundle is paired with a reflector displacement device (RDD) to detect liquid level in accordance with its detection area. Based on displacement sensor, the working principle of system is by utilizing hydrostatic pressure to shift the reflector attached to the membrane. Detection of liquid level is done through changes of reflected light intensity from the reflector that goes into each sensor probe. The results show that the sensor can be applied to the front slope or back slope area. Working area and resolution of sensors working on the front slope area are 0–130 cm and 1 cm, meanwhile for the back slope area are 0–50 cm and 0.1 cm.",

keywords = "Back slope, Fiber bundled probe, Front slope, Hydrostatic pressure, Liquid level sensor",

author = "Samian and Zaidan, {A. H.} and Sujito and M. Yasin and M. Pujiyati and Supadi",

note = "Publisher Copyright: {\textcopyright} 2018 Elsevier B.V.",

year = "2018",

month = sep,

day = "1",

doi = "10.1016/j.sna.2018.08.032",

language = "English",

volume = "280",

pages = "552--558",

journal = "Sensors and Actuators, A: Physical",

issn = "0924-4247",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Liquid level sensor using two fiber bundles

AU - Samian,

AU - Zaidan, A. H.

AU - Sujito,

AU - Yasin, M.

AU - Pujiyati, M.

AU - Supadi,

PY - 2018/9/1

Y1 - 2018/9/1

N2 - The two-tier detection of liquid level using two fiber bundles as sensor has been successfully demonstrated. Each fiber bundle is paired with a reflector displacement device (RDD) to detect liquid level in accordance with its detection area. Based on displacement sensor, the working principle of system is by utilizing hydrostatic pressure to shift the reflector attached to the membrane. Detection of liquid level is done through changes of reflected light intensity from the reflector that goes into each sensor probe. The results show that the sensor can be applied to the front slope or back slope area. Working area and resolution of sensors working on the front slope area are 0–130 cm and 1 cm, meanwhile for the back slope area are 0–50 cm and 0.1 cm.

AB - The two-tier detection of liquid level using two fiber bundles as sensor has been successfully demonstrated. Each fiber bundle is paired with a reflector displacement device (RDD) to detect liquid level in accordance with its detection area. Based on displacement sensor, the working principle of system is by utilizing hydrostatic pressure to shift the reflector attached to the membrane. Detection of liquid level is done through changes of reflected light intensity from the reflector that goes into each sensor probe. The results show that the sensor can be applied to the front slope or back slope area. Working area and resolution of sensors working on the front slope area are 0–130 cm and 1 cm, meanwhile for the back slope area are 0–50 cm and 0.1 cm.

KW - Back slope

KW - Fiber bundled probe

KW - Front slope

KW - Hydrostatic pressure

KW - Liquid level sensor

UR - http://www.scopus.com/inward/record.url?scp=85052234864&partnerID=8YFLogxK

U2 - 10.1016/j.sna.2018.08.032

DO - 10.1016/j.sna.2018.08.032

M3 - Article

AN - SCOPUS:85052234864

SN - 0924-4247

VL - 280

SP - 552

EP - 558

JO - Sensors and Actuators, A: Physical

JF - Sensors and Actuators, A: Physical

ER -

Liquid level sensor using two fiber bundles

Abstract

Keywords

Access to Document

Fingerprint

Cite this