Implementation of the hardware module of IoT-based infant incubator monitoring system

Wervyan Shalannanda, Irma Zakia, Fahmi Fahmi, Erwin Sutanto

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

4 Citations (Scopus)

Abstract

This document describes the implementation of IoT-based incubator monitoring system. The proposed module used a microcontroller board along with three groups of components: biosensors, environment monitoring sensors, and communication module. This research replaced Arduino Uno Rev3 and ESP8266 communication module with an Arduino Uno+WiFi, a microcontroller and communication module in a single board, and an additional sensor to measure pulse rate and pulse oximeter. This research also acquired data from the new sensor and used related measuring tools data for comparison purpose. The measurement results show that the average error of pulse rate was less than one per cent, while the SpO2 is slightly above three per cent.

Original languageEnglish
Title of host publicationProceeding of 14th International Conference on Telecommunication Systems, Services, and Applications, TSSA 2020
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781728175980
DOIs
Publication statusPublished - 4 Nov 2020
Event14th International Conference on Telecommunication Systems, Services, and Applications, TSSA 2020 - Bandung, Indonesia
Duration: 4 Nov 20205 Nov 2020

Publication series

NameProceeding of 14th International Conference on Telecommunication Systems, Services, and Applications, TSSA 2020

Conference

Conference14th International Conference on Telecommunication Systems, Services, and Applications, TSSA 2020
Country/TerritoryIndonesia
CityBandung
Period4/11/205/11/20

Keywords

  • Arduino Uno+WiFi
  • Data acquisition
  • Data communication
  • IoT-based system

Fingerprint

Dive into the research topics of 'Implementation of the hardware module of IoT-based infant incubator monitoring system'. Together they form a unique fingerprint.

Cite this