TY - GEN
T1 - Effect of LEG4 concentration as a sensitizer on increasing efficiency in DSSC-based solar cells
AU - Saputri, D. G.
AU - Ramelan, A. H.
AU - Sayekti, W.
AU - Nurosyid, F.
AU - Ramadhani, F.
AU - Supriyanto, Agus
N1 - Publisher Copyright:
© 2020 American Institute of Physics Inc.. All rights reserved.
PY - 2020/11/16
Y1 - 2020/11/16
N2 - This study examined the addition of synthetic dye LEG4 (DN-F05) to electrical properties. The Dye-Sensitized Solar Cell (DSSC) component to be tested is composed of FTO substrates coated by Ti02-Dye-Electrolite-Platina. The working electrode layer is Titanium dioxide (TÍO2) which is deposited on the FTO substrate by the spin coating method. In order for this layer to dry it is then annealed in the furnace with a temperature of 450°C for 30 minutes. After that, the layer is soaked in dye. There are three variations of dye concentration LEG4, namely LEG4 (0.02 wt), LEG4 (0.08 wt), and LEG4 (0.1 wt) with ethanol solvent, then rotated on a stirrer hotplate for 2 hours. Another opposing electrode process is made by medically positioning liquid platinum on an FTO substrate, the counter electrode is used as a mediator. Testing the electrical properties using IPCE and I-V Meter. From this work is obtained a good efficiency in line with the decrease in dye mass concentration, i.e. 4.76%, 4.95%, 5.15%, these results are supported by IPCE test.
AB - This study examined the addition of synthetic dye LEG4 (DN-F05) to electrical properties. The Dye-Sensitized Solar Cell (DSSC) component to be tested is composed of FTO substrates coated by Ti02-Dye-Electrolite-Platina. The working electrode layer is Titanium dioxide (TÍO2) which is deposited on the FTO substrate by the spin coating method. In order for this layer to dry it is then annealed in the furnace with a temperature of 450°C for 30 minutes. After that, the layer is soaked in dye. There are three variations of dye concentration LEG4, namely LEG4 (0.02 wt), LEG4 (0.08 wt), and LEG4 (0.1 wt) with ethanol solvent, then rotated on a stirrer hotplate for 2 hours. Another opposing electrode process is made by medically positioning liquid platinum on an FTO substrate, the counter electrode is used as a mediator. Testing the electrical properties using IPCE and I-V Meter. From this work is obtained a good efficiency in line with the decrease in dye mass concentration, i.e. 4.76%, 4.95%, 5.15%, these results are supported by IPCE test.
UR - http://www.scopus.com/inward/record.url?scp=85096711277&partnerID=8YFLogxK
U2 - 10.1063/5.0030849
DO - 10.1063/5.0030849
M3 - Conference contribution
AN - SCOPUS:85096711277
T3 - AIP Conference Proceedings
BT - International Conference on Science and Applied Science, ICSAS 2020
A2 - Purnama, Budi
A2 - Nugraha, Dewanta Arya
A2 - Anwar, Fuad
PB - American Institute of Physics Inc.
T2 - 2020 International Conference on Science and Applied Science, ICSAS 2020
Y2 - 7 July 2020
ER -