Design of laboratory scale fluid level measurement device based on arduino

Nur Fitri Apsari; Prisma Megantoro; Mian Usman Sattar; Andino Maseleno; Omar Tanane

doi:10.18196/jrc.1530

Design of laboratory scale fluid level measurement device based on arduino

Nur Fitri Apsari, Prisma Megantoro, Mian Usman Sattar, Andino Maseleno, Omar Tanane

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

Abstract

Measuring the height of a liquid using analog is very difficult, and its accuracy is very low. It is more accurate to measure liquid level using digital technology. Measurements of the correct fuel level are needed to measure fuel purchases at fuel stations or fuel retailers. The study aimed to design laboratory-level fuel level measurements based on the Arduino Uno microcontroller. The method used was a direct comparison between the measuring instrument and a ruler as a measuring standard. This device used a gas gauging sensor on the vehicle and an Arduino Uno microcontroller to process data and display data on the LCD and LabView. The results of the fluid level measurement could be used to determine the height of fuel surface. The error rate of the measuring instrument was ± 3% in a calm and bumpy state. The results showed that the device is suitable for use in measurement.

Original language	English
Pages (from-to)	145-149
Number of pages	5
Journal	Journal of Robotics and Control (JRC)
Volume	1
Issue number	5
DOIs	https://doi.org/10.18196/jrc.1530
Publication status	Published - Sept 2020
Externally published	Yes

Keywords

Arduino
Fluid Level
Gasoline Gauge

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.18196/jrc.1530

Cite this

@article{2d90a901352c4f7bb04dcfc5b4c483c2,

title = "Design of laboratory scale fluid level measurement device based on arduino",

abstract = "Measuring the height of a liquid using analog is very difficult, and its accuracy is very low. It is more accurate to measure liquid level using digital technology. Measurements of the correct fuel level are needed to measure fuel purchases at fuel stations or fuel retailers. The study aimed to design laboratory-level fuel level measurements based on the Arduino Uno microcontroller. The method used was a direct comparison between the measuring instrument and a ruler as a measuring standard. This device used a gas gauging sensor on the vehicle and an Arduino Uno microcontroller to process data and display data on the LCD and LabView. The results of the fluid level measurement could be used to determine the height of fuel surface. The error rate of the measuring instrument was ± 3% in a calm and bumpy state. The results showed that the device is suitable for use in measurement.",

keywords = "Arduino, Fluid Level, Gasoline Gauge",

author = "Apsari, {Nur Fitri} and Prisma Megantoro and Sattar, {Mian Usman} and Andino Maseleno and Omar Tanane",

year = "2020",

month = sep,

doi = "10.18196/jrc.1530",

language = "English",

volume = "1",

pages = "145--149",

journal = "Journal of Robotics and Control (JRC)",

issn = "2715-5056",

publisher = "Department of Electrical Engineering, Universitas Muhammadiyah Yogyakarta",

number = "5",

}

TY - JOUR

T1 - Design of laboratory scale fluid level measurement device based on arduino

AU - Apsari, Nur Fitri

AU - Megantoro, Prisma

AU - Sattar, Mian Usman

AU - Maseleno, Andino

AU - Tanane, Omar

PY - 2020/9

Y1 - 2020/9

N2 - Measuring the height of a liquid using analog is very difficult, and its accuracy is very low. It is more accurate to measure liquid level using digital technology. Measurements of the correct fuel level are needed to measure fuel purchases at fuel stations or fuel retailers. The study aimed to design laboratory-level fuel level measurements based on the Arduino Uno microcontroller. The method used was a direct comparison between the measuring instrument and a ruler as a measuring standard. This device used a gas gauging sensor on the vehicle and an Arduino Uno microcontroller to process data and display data on the LCD and LabView. The results of the fluid level measurement could be used to determine the height of fuel surface. The error rate of the measuring instrument was ± 3% in a calm and bumpy state. The results showed that the device is suitable for use in measurement.

AB - Measuring the height of a liquid using analog is very difficult, and its accuracy is very low. It is more accurate to measure liquid level using digital technology. Measurements of the correct fuel level are needed to measure fuel purchases at fuel stations or fuel retailers. The study aimed to design laboratory-level fuel level measurements based on the Arduino Uno microcontroller. The method used was a direct comparison between the measuring instrument and a ruler as a measuring standard. This device used a gas gauging sensor on the vehicle and an Arduino Uno microcontroller to process data and display data on the LCD and LabView. The results of the fluid level measurement could be used to determine the height of fuel surface. The error rate of the measuring instrument was ± 3% in a calm and bumpy state. The results showed that the device is suitable for use in measurement.

KW - Arduino

KW - Fluid Level

KW - Gasoline Gauge

UR - http://www.scopus.com/inward/record.url?scp=85096706139&partnerID=8YFLogxK

U2 - 10.18196/jrc.1530

DO - 10.18196/jrc.1530

M3 - Article

AN - SCOPUS:85096706139

SN - 2715-5056

VL - 1

SP - 145

EP - 149

JO - Journal of Robotics and Control (JRC)

JF - Journal of Robotics and Control (JRC)

IS - 5

ER -

Design of laboratory scale fluid level measurement device based on arduino

Abstract

Keywords

UN SDGs

Access to Document

Fingerprint

Cite this