Automatic limit switch calibrator for control valve at steam turbine of a geothermal power plant

Prisma Megantoro; Abdul Latif; Brahmantya Aji Pramudita; P. Vigneshwaran

doi:10.11591/eei.v10i3.3031

Automatic limit switch calibrator for control valve at steam turbine of a geothermal power plant

Prisma Megantoro, Abdul Latif, Brahmantya Aji Pramudita, P. Vigneshwaran

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

Abstract

Measurement of fluid level in steam valves should require precise values. The instrument designed in this article is used to find out how precise the limit switch is used as an indicator control valve at certain points. The measurement technique will be implemented on a control valve on the geothermal power plant. This device is using the Arduino Due board as a data processor and modified the data signal of the vernier caliper to measure the valve opening. The TFT LCD layer is used to display the measurement and calibration results. The test results of this device indicate that this device has an accuracy level of more than 99%.

Original language	English
Pages (from-to)	1245-1251
Number of pages	7
Journal	Bulletin of Electrical Engineering and Informatics
Volume	10
Issue number	3
DOIs	https://doi.org/10.11591/eei.v10i3.3031
Publication status	Published - Jun 2021

Keywords

Control valve
Limit switch
Microcontroller
Process innovation
Reliable electricity
Smart meter

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.11591/eei.v10i3.3031

Cite this

@article{8896c3a822a746d9bb1a21f35d8bc49f,

title = "Automatic limit switch calibrator for control valve at steam turbine of a geothermal power plant",

abstract = "Measurement of fluid level in steam valves should require precise values. The instrument designed in this article is used to find out how precise the limit switch is used as an indicator control valve at certain points. The measurement technique will be implemented on a control valve on the geothermal power plant. This device is using the Arduino Due board as a data processor and modified the data signal of the vernier caliper to measure the valve opening. The TFT LCD layer is used to display the measurement and calibration results. The test results of this device indicate that this device has an accuracy level of more than 99%.",

keywords = "Control valve, Limit switch, Microcontroller, Process innovation, Reliable electricity, Smart meter",

author = "Prisma Megantoro and Abdul Latif and Pramudita, {Brahmantya Aji} and P. Vigneshwaran",

year = "2021",

month = jun,

doi = "10.11591/eei.v10i3.3031",

language = "English",

volume = "10",

pages = "1245--1251",

journal = "Bulletin of Electrical Engineering and Informatics",

issn = "2089-3191",

publisher = "Institute of Advanced Engineering and Science (IAES)",

number = "3",

}

TY - JOUR

T1 - Automatic limit switch calibrator for control valve at steam turbine of a geothermal power plant

AU - Megantoro, Prisma

AU - Latif, Abdul

AU - Pramudita, Brahmantya Aji

AU - Vigneshwaran, P.

PY - 2021/6

Y1 - 2021/6

N2 - Measurement of fluid level in steam valves should require precise values. The instrument designed in this article is used to find out how precise the limit switch is used as an indicator control valve at certain points. The measurement technique will be implemented on a control valve on the geothermal power plant. This device is using the Arduino Due board as a data processor and modified the data signal of the vernier caliper to measure the valve opening. The TFT LCD layer is used to display the measurement and calibration results. The test results of this device indicate that this device has an accuracy level of more than 99%.

AB - Measurement of fluid level in steam valves should require precise values. The instrument designed in this article is used to find out how precise the limit switch is used as an indicator control valve at certain points. The measurement technique will be implemented on a control valve on the geothermal power plant. This device is using the Arduino Due board as a data processor and modified the data signal of the vernier caliper to measure the valve opening. The TFT LCD layer is used to display the measurement and calibration results. The test results of this device indicate that this device has an accuracy level of more than 99%.

KW - Control valve

KW - Limit switch

KW - Microcontroller

KW - Process innovation

KW - Reliable electricity

KW - Smart meter

UR - http://www.scopus.com/inward/record.url?scp=85107292659&partnerID=8YFLogxK

U2 - 10.11591/eei.v10i3.3031

DO - 10.11591/eei.v10i3.3031

M3 - Article

AN - SCOPUS:85107292659

SN - 2089-3191

VL - 10

SP - 1245

EP - 1251

JO - Bulletin of Electrical Engineering and Informatics

JF - Bulletin of Electrical Engineering and Informatics

IS - 3

ER -

Automatic limit switch calibrator for control valve at steam turbine of a geothermal power plant

Abstract

Keywords

UN SDGs

Access to Document

Fingerprint

Cite this